Tip
v
If someone who is not in your list
of contacts calls you or sends you a
message, you can create a contact
from Call History, or from the
message by tapping Menu > Save
to Contacts.
In the list of contact information,
you’ll see where you can add a
picture or assign a ring tone to a
contact.
To change contact
information
1. Tap Start > Contacts.
2. Tap the contact.
3. Tap
Menu > Edit and enter the
changes.
4. When finished, tap OK.
To work with the contact list
There are several ways to use and
synchronise the contact list. Here are
a few tips:
1. Tap Start > Contacts.
2. In the contact list, do any of the
following:
v
In Name view, you can search for a
contact by entering a name or by
using the alphabetical index. To
switch to Name view, tap
Menu >
View By > Name.
v
To see a summary of information
about a contact, tap the contact.
From there you can also make a call
or send a message.
v
To see a list of available actions for a
contact, tap and hold the contact.
COMMUNICATIONS
To Next Page
Loading...
