LG KS20 - How to Use HOT KIMCHI

- 180 -
9. Calibration & RF Auto Test Program (Hot Kimchi)
9.2 How to use HOT KIMCHI
* Procedure
1. Click “Logic Operation” of “SETTING” menu bar
2. Select “UART Port” that PC can communicate with the phone
3. Select “LOGIC MODE” that you want
- Logic Mode -> 1: Calibration Only
2: Auto Test Only
3: Calibration + Auto
LGE Internal Use Only Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
1
2
3