- 93 -
4. TROUBLE SHOOTING
4.6.2 Checking UMTS PAM Control Block
• PAM control signal
1. PWR_DET : UMTS Tx Power Detected value (Check R519)
2. TX_AGC_ADJ : UMTS RTR6275 Tx Amp Gain Control
3. +VPWR: UMTS PAM Main Voltage (3V < +VPWR < 4.2V)
4. PA_ON : Turns the PA on and off
5. PA_R0 : Control signals that step the active PA mode and bias
LGE Internal Use Only
Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
To Next Page
Loading...
