● Place the display in a built-in enclosure unless proper ventilation is provided.
● Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix LCD
permanently.
Do not press the LCD screen with your finger for a long time as this may cause some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen. However, this will have no impact or effect on the
display performance.
If possible, use the recommended resolution to obtain the best image quality for your LCD display. If used under any mode except
the recommended resolution, some scaled or processed images may appear on the screen. However, this is characteristic of the
fixed-resolution LCD panel.
To Next Page
Loading...
Need help?
General
