A3
Connecting the Display
Important
This illustration depicts the general model of connection. Your monitor may differ from
the items shown in the picture.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand
1. Place the monitor with its front facing downward on a soft cloth.
2
.
Check the direction of the Stand Body, and connect it into the Hinge Body as shown in the
picture.
3. Check the direction of the Stand Base, and connect it into the Stand Body.
4
.
Once assembled take the monitor up carefully and face the front side
Stand Body
Stand Base
Stand Body
Hinge Body
To Next Page
Loading...
