LG L226WA-WN - Page 21

On Screen Display(OSD) Selection and Adjustment
A20
SCREEN
ARC
Auto-configure
Clock
Phase
Position
HDMI
H-Position
V-Position
Position
This function is suitable for analogue signal
input only. To adjust position of the screen.
Press the AUTO/SET button to display the
sub-menu for position.
V-Position: Moving the screen position vertically.
Video: Used when it is connected with DVD or SET-TOP BOX through HDMI.
* If you want to connect VCR, select VIDEO in this menu. Otherwise, you
may see noise in the margin of the screen due to the difference in the
screen size .
PC : Used when it is connected with PC through HDMI.
* If you want to connect PC, select PC in this menu. Otherwise, the screen
may be too large to support PC sub screen
HDMI
H-Position: Moving the screen position horizontally.
Note
When the Interlace Signal is inputted at the RGB source input level,
the Positionmenu can't be used.