A19
On Screen Display(OSD) Selection and Adjustment
Screen Adjustment
This function is suitable for analogue signal input only. This button is for the
automatic adjustment of the screen Position, Clock and Phase.
ARC
Auto-
configure
This function is suitable for analogue signal input only to minimize any vertical bars or
stripes visible on the screen background. The horizontal screen size will also change.
Clock
This function is suitable for analogue signal input only to adjust the focus of the
display. This item allows you to remove any horizontal noise and clear or
sharpen the image of characters.
Phase
To select the image size of the screen.
Position
This function is suitable for analogue signal
input only to adjust position of the screen.
Press the /PIP button to display the sub-
menu for position.
Left
Right
Moving the screen position horizontally.
Up
Down
Moving the screen position vertically.
<HDMI(PC), RGB input only>
<HDMI(Video), Component input only>
Full
Original
1:1
Full
Original
To Next Page
Loading...
