1. MAIN POWER (ON/OFF)
switches the set on or off.
2. LED (Light Emitting Diode) DISPLAY
(option)
illuminates brightly when the set is switched on.
: DRP signal indicator
: DRPC signal indicator
: PIP input signal indicator
: SLEEP timer indicator
: TURBO SOUND indicator
: CHILD LOCK indicator
: Progressive indicator
: 100HZ indicator
: STEREO indicator
: SLEEP timer indicator
3. POWER/STANDBY INDICATOR
illuminates brightly when the set is in standby
mode.
dims when the set is switched on.
4. MENU
selects a menu.
5. OK
accepts your selection or displays the current
mode.
FF / GG (Volume Down/Up)
adjusts the volume.
adjusts menu settings.
DD
/
EE
(Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
6. REMOTE CONTROL SENSOR
7. EYE (option)
adjusts picture according to the surrounding
conditions.
8. HEADPHONE SOCKET
Connect the headphone plug to this socket.
9. AUDIO/VIDEO IN SOCKETS (AV4)
Connect the audio/video out sockets of exter-
nal equipment to these sockets.
S-VIDEO/AUDIO IN SOCKETS (S-AV)
Connect the video out socket of an S-VIDEO
VCR to the S-VIDEO socket.
Connect the audio out sockets of the S-
VIDEO VCR to the audio sockets as in AV4.
10. PC INPUT SOCKET (option)
Connect the monitor output socket of the
PERSONAL COMPUTER to this socket.
Note : Set the resolution of PC to VGA
640x480 (60 Hz) video mode to use this set as
PC monitor.
To Next Page
Loading...
