Need help?Do you have a question about the LG Lafinion 82W and is the answer not in the manual?
Crucial warnings regarding safety parts, shock, fire, and hazards.
Guidelines for using isolation transformers and handling specific components.
Information on X-ray sources and necessary protection measures.
Procedures for performing cold and hot AC leakage current checks.
Details on broadcast methods, AV system, channels, voltage, and screen.
Lists supported features like Teletext, various inputs, stereo modes, etc.
Specifies input/output levels, frequency response, and signal-to-noise ratios.
Explains SSM, PSM, ARC, VCR/DVD, and PIP button functions.
Details on Power, Volume, Mute, Menu, Size, Still, Position, Scan, Reset controls.
Covers Main Still, I/II, Sleep, Eye, Teletext, TV/VCR/DVD, Turbo functions.
Instructions for charging the remote using its internal generator.
Describes the main power switch, LED displays, MENU, and OK buttons.
Details on headphone, AV, S-VIDEO, and PC input sockets.
Safety measures including transformer use and appliance requirements.
Steps for DVCO adjustment and fine-tuning focus using FBT volumes.
Initial steps for purity and convergence, including degaussing and magnet placement.
Fine-tuning convergence using magnets and tabs for color line alignment.
Procedures for adjusting screen voltage and white balance for optimal picture.
Adjusting various deflection parameters like linearity, amplitude, and shift.
Explains EPP, UC, LC, A-BOW, A-ANG, V-SCR for picture geometry correction.
How to prepare for model-specific option adjustments using the remote control.
Step-by-step guidance for setting OPTION 1, 2, and 3 functions.
Lists setting values for MSP3411 pre-scaler and DBS version.
Configuration options for language and Teletext language settings.
Settings for dynamic contrast, auto contrast, and auto luminance control.
Configuring OFFSET DATA, SUB ADD, START BIT, and STOP BIT for IIC communication.
Setting EEPROM SUB ADD, SLAVE ADDRESS, and SUB BRIGHT CONTOR DATA.
Troubleshooting steps when the TV has no power but the SMPS is active.
Troubleshooting steps for no power when the SMPS is not functioning.
Diagnosing issues when the horizontal output is fine but no picture is displayed.
Steps to troubleshoot no audio output while the picture is normal.
Diagnosing and fixing problems with the VM circuit.
Procedures to resolve geometric distortion known as pin cushion.
Troubleshooting no sound from the headphone jack.
Steps to resolve issues with receiving main TV channels.
Diagnosing reception issues for NTSC-M and SECAM-L standards.
Steps to diagnose and fix problems with the teletext feature.
Troubleshooting steps for the absence of vertical picture deflection.
Diagnosing problems with picture input from DVD or component sources.
Visual representation of the main printed circuit board with component placement.
Detailed list of component locations and references on the main PCB.
Diagrams showing the top and bottom views of the Micom PCB.
Schematic of the control circuit board for the remote.
Top and bottom views of the 100Hz printed circuit board.
Schematic of the sound processing circuit board.
Layouts for CRT, Power supply, and Side A/V boards.
Overview of how major functional blocks are interconnected.
Shows VSP9427, CXA2069Q, LGDT1000B ICs and their connections.
Details connections of MICOM ICs, SDRAM, and EPROM for control.
Visual breakdown of the TV's components and their assembly.
List of part numbers and descriptions for the exploded view.
Comprehensive list of Integrated Circuits (ICs) and Transistors with part numbers.
List of diodes with their part numbers and specifications.
List of capacitors with their part numbers and specifications.
Continues the list of capacitors with their part numbers and specifications.
Continues the list of capacitors with their part numbers and specifications.
Continues the list of capacitors with their part numbers and specifications.
List of coils and transformers with their part numbers.
List of resistors with their part numbers and specifications.
Continues the list of resistors with their part numbers and specifications.
Continues the list of resistors with their part numbers and specifications.
Continues the list of resistors with their part numbers and specifications.
Lists switches, spark gaps, filters, accessories, and miscellaneous items.
Schematic for the Micom control board.
Diagrams for CRT/VM board and FZ40 key board.
Schematics for the main, SMPS, and deflection boards.
Diagrams for Side AV and pin cushion compensation circuits.
Shows VSP9427, CXA2069Q, LGDT1000B ICs and their connections.
Details connections for component inputs, VGA, and other interface signals.
To Next Page
General
