Installation parts you should purchase.
NOTICE
(Left and right
are identical)
More than
28"(70cm)
More than
23.6"(60cm)
Sleeve
Bushing-Sleeve
Putty(Gum Type Sealer)
Vinyl tape (Wide)
• To carry out the drainage
test, remove the air filter
and pour water into the heat
exchanger.
• Apply after carrying out a
drainage test.
Saddle
More than
19.6"(50cm)
Gas side piping (Optional part)
Liquid side piping (Optional part)
Additional drain pipe
Vinyl tape (Narrow)
Connecting cable
(Optional part)
Bend the pipe as close as possible
on the wall but be careful so that it
may not break.
More than More than
11.8"(30cm )11.8"(30cm )
More than
11.8"(30cm )
More than More than
11.8"(30cm) 11.8"(30cm)
More than
11.8"(30cm)
More than More than
3.9"(10cm) 3.9"(10cm)
More than
7.9"(20cm)
To Next Page
Loading...
