16
ADVANCED FUNCTIONS
ENGLISH
* Features may change according to the
type of model.
* Features may change according to the
type of model.
Energy saving cooling mode
This mode minimizes power consumption
during cooling and increases the set tempera-
ture to the optimal level for a more comfort-
able environment.
1 Press | to turn the power on.
2 Press f repeatedly to select the cooling
operation.
- A is displayed on the display screen.
3 Press
P
.
-
G is displayed on the display screen.
Display screen brightness
You can adjust the brightness of the indoor
unit display screen.
1 Press
G
to turn on/off the display
screen.
Operating the air conditioner
without the remote control
You can use the On/Off button of the indoor
unit to operate the air conditioner when the
remote control is unavailable. However, the
fan speed is set to high.
1 Open the front cover.
- Lift up both sides of the cover slightly.
2 Press the On/Off button.
- For cooling and heating models, the oper-
ation mode changes based on the room
temperature as indicated in the table
below.
- Cooling-only models are set to 72 °F
(22 °C).
NOTE
!
This function may not be supported,
depending on the model.
NOTE
!
This function may not be supported,
depending on the model.
NOTE
!
• It is possible that the air conditioner and
remote control may display different
temperatures during this operation.
Room temp.
Set
temp.
Operation
mode
Below 70 °F (21 °C)
75 °F
(24 °C)
Heating
operation
Above 70 °F (21 °C)
and below 75 °F
(24 °C)
73 °F
(23 °C)
Dehumidifying
operation
Above 75 °F (24 °C)
72 °F
(22 °C)
Cooling
operation
To Next Page
Loading...
