Maintenance and Service
i. If you want to pull out the filter upward,
open the inlet grille slightly. Turn inside
out the front grille.
Disassemble the inlet grille from the front
grille with separating the hing_ part by
inserting a "_' _pe screw-driver tip.
Rotate the inlet grille 180 d,_rees and
insert the h_ks into the lower holes of
front grille.
Then, insert the filter, (See Figure12, i3)
Figure 12
Inlel Gr_He Figure 13
2.Attach the front grille b the cabinet by
inserting the tabs on the grille into the tabs
on the front d the cabinet Push the grille in
until it snaps into place. (See Figure14)
Figure 14
3. L_ the inlet grille and s_ure it with a type
A screw though the front grilie.
(See Figure 15)
4. If you want to pull out the filter dc_wnwardi,
use the reversible inlet grille without
change.
(Tlhe grille is already assembl_ for that
way.)
Figure 15
22 Room Air Conditioner
To Next Page
Loading...