EasyManuals Logo

LG LDS5040ST User Manual

LG LDS5040ST
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
22
BEFORE CALLING FOR SERVICE
TROUBLESHOOTING
Food soil remains on dishes. Improper cycle selection. Select correct cycle based on soil level and
type of dishware being washed.
Water temperature too low. Check water supply connection or water
heater setting.
Dish washing detergent was not used. Use recommended detergent.
Low inlet water pressure. Water pressure should be between 20 and
120 psi.
Water jet holes on spray arms blocked. Clean the spray arms.
Improper loading of dishes Make sure dishes do not block spray arm ro-
tation or interfere with detergent dispenser.
Filters are clogged. Clean lters.
Noise Some level of noise is normal during opera-
tion.
Detergent cover opening.
Drain pump at the beginning of drain cycle.
The dishwasher is not level. Adjust leveling feet.
Nozzle arm knocking against dishes. Reposition the dishes.
Cloudiness on glassware. Combination of excessive detergent and
hard water.
Use less detergent and use a rinse aid to
minimize the problem.
Black or gray marks on dishes. Aluminum items rubbing dishes during
cycle.
Reposition the dishes.
Yellow or brown lm on inside of surfaces
of dishwasher.
Coee or tea stains. Eliminate the stain by using a stain removal
product.
Dishes don’t dry. Rinse agent dispenser empty. Check and rell the rinse agent dispenser if
empty.
Lamps do not illuminate. Power is not connected. Connect power supply.
Sprays arms do not rotate smoothly. Holes of spray arms are blocked by food
particles.
Clean the holes of spray arms.
Upper rack is crooked. Rack is poorly adjusted. See the Height Adjustable Upper Rack
section.
Dishwasher continuously beeps when the
door is opened, during or right after a cycle
has completed.
The contents of the dishwasher are hot and
care should be used when placing your
hands inside the dishwasher.
Close the door until the dishwasher and
dishes have cooled down. The beeping will
go away if the door is closed or the interior
temperature has been cooled.
IE Error Water inlet problem. Check for a clogged, kinked or frozen water
inlet hose.
Check water supply.
OE Error Drainage Problem. Check for a clogged, kinked or frozen drain
hose.
FE Error Excessive Water supplied.
Please call an Authorized Service Center or
LGE Customer Service at 1-800-243-0000
(US) 1-888-542-2623 (Canada)
HE Error Heater circuit failure.
tE Error Thermistor failure or very high inlet water
temperature (over 194F)
If you have followed this troubleshooting guide and the problem persists, or if the problem you are experiencing is not listed here, please
call LGE Customer Service at 1-800-243-0000(US), 1-888-542-2623(Canada).

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG LDS5040ST and is the answer not in the manual?

LG LDS5040ST Specifications

General IconGeneral
Stylebuilt-in dishwashers
Colorstainless steel
Noise level50 decibels
Control Typeelectronic
Delay Startyes
Child Lockno
Number of Racks2
Cycle Signalno
Water Filteryes
Food Disposeryes
Sanitize Settingsyes
Annual Energy Consumption279 kilowatt hours
Voltage120 volts
Current12 amperes
Weight and Dimensions IconWeight and Dimensions
Depth24.85 inches
Height33.5 inches
Width23.75 inches
Net Weight89 pounds

Related product manuals