To Next Page

To Previous Page

PARTS AND FEATURES

CONTROL PANEL

Cycle Options

Press the desired cycle and then select the options for that

cycle.

SANITARY

This high-temperature rinse sanitizes dishes and glassware in

accordance with NSF/ANSI Standard 184 for residential dish-

washers. Certied dishwashers are not intended for licensed

food establishments.

EXTRA DRY

Select the EXTRA DRY option for better drying performance.

This option adds 60 minutes of extra drying time to the cycle.

EXTRA RINSE

The Extra Rinse symbol indicates that an extra rinse has been

added to the cycle.

DELAY START

The Delay Start feature allows you to delay the start of a se-

lected cycle. Each time the Delay Start button is pressed, the

delay time will increase an hour. The delay start time can be

set from 1 to 19 hours, in one-hour increments.

CHILD LOCK

The Child Lock feature helps prevent your settings from be-

ing changed during a cycle. Selecting this feature locks all

of the buttons, except for the Power button, on the control

panel. This feature does not lock the door.

To activate the Child Lock:

1. Press the Power button.

2. Select the cycle (and desired options).

3. Press and hold the 2VJDLBOE6QQFS0OMZ buttons for UISFF

seconds. The Child Lock indicator will illuminate in UIFEJ

Tplay once the Child Lock is activated.

DIGITAL DISPLAY

The Digital Display on the control panel shows the ESTIMAT-

ED cycle time. When the dishwasher is powered up, the dis-

play will be blank. When the cycle and options are selected,

the display will show the total estimated time to complete

those selections. During operation, the display shows the re-

maining estimated operating time.

tThe estimated time shown in the display does not include

delay times for heating water, etc.

tIf Delay Wash is selected, the display shows the delay time

in hours.

tTime may vary depending on the soil level of your load.

tThe RINSE AID symbol

indicates that the rinse aid

needs to be relled.

NOTE

POWER

! Press the Power button to turn on the control panel. If no

cycle is selected within four minutes, the dishwasher will

power o.

! After the cycle is complete, the power automatically turns

o for safety and to reduce energy consumption.”

! If there is a power surge, power outage, or disruption of

any kind, the PF indicator will display and power will be au-

tomatically turned o for safety. The cycle will need to be

restarted.

SMART DIAGNOSIS

Should you experience any problems with your dishwasher,

it has the capability of transmitting data to your Smart Phone

using the LG Smart Laundry & DW Application or via you tele-

phone to the LG call center.

Smart Diagnosis is a troubleshooting feature designed to as-

sist, not replace, the traditional method of troubleshooting

through service calls. The eectiveness of this feature de-

pends upon various factors, including, but not limited to, the

reception of the cellular phone being used for transmission,

any external noise that may be present during the transmis-

sion, and the acoustics of the room where the machine is lo-

cated. Accordingly, LG does not guarantee that Smart Diag-

nosis would accurately troubleshoot any given issue.

NOTE

Questions and Answers:

Need help?

Do you have a question about the LG LDS5040ST and is the answer not in the manual?

LG LDS5040ST Specifications

General

Style	built-in dishwashers
Color	stainless steel
Noise level	50 decibels
Control Type	electronic
Delay Start	yes
Child Lock	no
Number of Racks	2
Cycle Signal	no
Water Filter	yes
Food Disposer	yes
Sanitize Settings	yes
Annual Energy Consumption	279 kilowatt hours
Voltage	120 volts
Current	12 amperes