REFRIGERATOR INSTALLATION
19
HOW TO REMOVE AND INSTALL THE
PULLOUT DRAWER
IMPORTANT: To avoid possible injury or product or
property damage, you will need two people to perform the
following instructions.
1. Removing Pullout Drawer
• Pull the drawer open to full extension. Remove the
lower basket (1) by lifting basket from rail system.
(If you tilt the door, it will be easier.)
• Press both hangers with your thumbs to lift it up.
• Separate the left and right rail cover
• Remove the screws(2) of the rail on both sides.
• With both hands, hold both sides of the door and pull it
up to separate it from the rails.
• With both hands, hold the center bar and push it in to let
both rails fitted simultaneously.
: When you remove the drawer, do not
hold the handle. If it may come off and it could cause
personal injury.
: When laying the drawer down, be careful
not to damage the floor or hurt your feet by the sharp
edges on hinge side.
To Next Page
Loading...
