LG LFX25973 Series - Control Panel Features

26 HOWTO USE
Control Panel Features (continued)
Energy Saving [_
The Energy Saving function disables the mullion
heater located on the refrigerator door in order to
conserve electricity. Press and hold the Energy
Saving button for three seconds to activate or
deactivate this function.
_-_ NOTE
Discontinue using the Energy Saving function
if excessive moisture begins to collect on the
door mullion.
Press the LIGHT button, to turn on the
dispenser light. The indicator will appear on the
LED display.
w C_AN_E
Change Filter IT, ......
J_u .....
When the water filter indicator turns on, you
have to change the water filter. After changing
the water filter, press and hold the FILTER
button for three seconds to turn the indicator
light off. You need to change the water filter
approximately every six months.
Alarm q))
When power is connected to the
refrigerator, the door alarm is initially set to
ON. When you press the ALARM button,
the display will change to OFF and the
Alarm function will deactivate.
When either the refrigerator or the freezer
door is left open for more than 60 seconds,
the alarm tone will sound to let you know
that the door is open.
When you close the door, the door alarm
will stop.
D
Control Lock CC]
The Control Lock function disables every other
button on the display.
When power is initially connected to the
refrigerator, the Lock function is off.
If you want to activate the Lock function to
lock other buttons, press and hold the Lock
button for three seconds or more. The Lock
icon will display and the Lock function is
now enabled.
To disable the Lock function, press and hold
the Lock button for approximately three
seconds.
_ Z_ CAUTION
Display Mode (For Store Use Only)
The Display Mode disabtes all cooling
in the refrigerator and freezer sections
to conserve energy while on display in
a retail store, When activated, OFF will
display on the control panel.
To deactivate:
With either refrigerator door opened,
press and hold the Refrigerator and Ice
Plus buttons at the same time for five
seconds. The control panel wilt beep and
the temperature settings wilt display to
confirm that Display Mode is deactivated.
Use the same procedure to activate the
Display Mode.