14
Installing the Micro SIM card and battery
Before you can start exploring your new phone, you’ll need to set it up. To insert the Micro SIM
card and battery:
1 Hold the phone on your hand fi rmly. With the o
ther hand, lift the battery cover using the
fi ngertip cutout located on the bottom of the cover and pull it up to remove it.
Fingertip
cutout
2 Slide the Micro SIM card into the Micro SIM card slot. Make sure the gold contact area on
the card is facing downwards and the notched side is inserted fi rst (see image below).
3 Insert the battery into place by aligning the gold contacts on the phone and the battery
and press the battery down until it clicks into place
.
Getting to know your phone
To Next Page
Loading...
