2. PERFORMANCE
- 35 -
Copyright © 2014 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
Rx Max input Sensitivity ≥ -30dBm @ PER ≤ 10%(5170 ~ 5815 MHz)
Rx Adjacent Channel
Rejection
PER ≤ 10%,
ACR ≥ 16dB@13.5Mbps, ACR ≥ 13dB@27Mbps,
ACR ≥ 11dB@40.5Mbps, ACR ≥ 8dB@54Mbps,
ACR ≥ 4dB@81Mbps, ACR ≥ 0dB@108Mbps
ACR ≥ -1dB@121.5Mbps, ACR ≥ -2dB@135Mbps
ACR ≥ -7dB@162Mbps, ACR ≥ -9dB@180Mbps
※ACR shall be measured by setting the desired signal's strength
3 dB above the rate-dependent sensitivity specified in min inpu
t sensitivity
To Next Page
Loading...
