105
electronic devices. It operates over a distance of a few centimeters. You can share your
content with an NFC tag or another NFC support device by simply tapping it with your
device. If you tap an NFC tag with your device, it will display the tag content on your
device.
To switch NFC on or off: From the Home screen, touch and slide the notification
panel down with your finger, then select the NFC icon to turn it on.
NOTE: When airplane mode is activated, the NFC application can be used.
Using NFC: To use NFC, make sure your device is switched on, and activate NFC if
disabled.
Direct/Android Beam – When this feature is turned on, you can beam app content to
another NFC-capable device by holding the devices close together.
Just bring the device together(typically back to back) and then tap your screen. The app
determines what gets beamed.
SmartShare Beam – Turn on to receive multimedia content via SmartShare Beam
from LG phones or tablets.
Miracast – Mirror phone screen and sound onto Miracast dongle or TV Wirelessly.
Wireless storage – You can manage files on your phone in the computer or copy files
to the phone from the computer without a USB connection. Make sure that the phone
and computer are connected to the same network, then switch on Wireless storage.
Then, enter the web addresses shown on your phone in the address bar of the browser
on your computer.
< Tethering & networks >
Wi-Fi hotspot – You can also use your phone to provide a mobile broadband
connection. Create a hotspot and share your connection. Please read "Sharing your
phone's data connection" for more information.
Bluetooth tethering – Allows you to set your phone whether you are sharing the
Internet connection or not.
To Next Page
Loading...
