LG LG-H815 - 10. Calibration; Calibration Cable Setting; Flash Tool D;L Setting

Copyright ⓒ 2015 LG Electronics. Inc. All right
reserved. Only training and service purposes
LGE Internal Use Only
10. CALIBRATION
1. Summary
2. . USB COM port Setting
4. Flash tool D/L setting
3. Calibration Cable setting
※ If you want more information, please refer B2B’s Notification “RF Calibration User Guide”.
CAL INFORMATION
S/W VERSION
[TachyonV2013] LGH815 20150523 ALL File Calibration
Please Check the Version to "B2B"
H/W
Name Part No.
PIF PIF200 BJAY0024021
USB Cable USB Cable RAD32247898
Power Cable DC Power Cable RAD32247878
I/O Cable 5P E-SATA_DC_Plug RAD32167861
RF Cable_Main MXFJM3WX6000 RAD32827895
Power Supply_PIF Power supply 5.2V
Power Supply_Phone Power supply 5.0V
PF Test Equipment CMW500
Notice
1. Use the Battery (Refer to Attached ppt)
1) Phone states: Power off
2) If do not use the battery, TX fails.
2. Port Setting (Refer to Attached ppt)
1) Uart Port1 : Use the "LGE Mobile USB Serial Port"
CMW 500 RF
Cable connection
107107