LG LGWADREM7150 - User Manual

Questions and Answers

K
Kathleen LoveAug 17, 2025
Why does my LG LGWADREM7150 Washer show UE UNBALANCE ERROR?
- R
  Rebecca MatthewsAug 17, 2025
  The UE UNBALANCE ERROR on your LG washer can occur due to several reasons. It may appear if the load is too small; in this case, add additional items to balance the load. This error can also happen when heavy articles are mixed with lighter items; always try to wash items of similar weight to evenly distribute the load. Finally, the load might be out of balance because articles have become tangled. If this occurs, manually redistribute the load.
J
jonesloriAug 19, 2025
What to do if my LG Washer shows IE INLET ERROR?
- C
  Christine RobinsonAug 19, 2025
  If your LG washer displays an IE INLET ERROR, it could be due to several reasons related to the water supply. First, ensure that the water supply faucets are fully open. Check the water inlet hoses to make sure they are not kinked, pinched, or crushed. Also, the water supply pressure might be too low; check another faucet in the house to ensure adequate water pressure. Avoid using leak-limiting hoses, as they can falsely trip and prevent the washer from filling.
E
Edward BensonAug 22, 2025
Why does my LG LGWADREM7150 Washer show a UE UNBALANCE ERROR?
- W
  Wendy DeanAug 22, 2025
  The UE UNBALANCE ERROR on your LG Washer typically indicates an issue with load distribution. This can occur if the load is too small; try adding more items to balance it. It can also happen when heavy items are mixed with lighter ones; try to wash similar-weight items together. If the load is tangled, manually redistribute the items in the drum.
J
Jessica ArmstrongAug 25, 2025
What to do if my LG LGWADREM7150 Washer shows an IE INLET ERROR?
- J
  johnsonraymondAug 26, 2025
  The IE INLET ERROR on your LG Washer indicates a problem with the water supply. First, ensure that the water supply faucets are fully open. Check the water inlet hoses for kinks, pinches, or crushing, especially behind or under the washer. The error could also be due to clogged water inlet filters, which may need cleaning. Low water supply pressure to the faucet or house, or leak-limiting hoses can also cause this issue. Finally, the end of the drain hose should be higher than 29.5 inches (75 cm) above the bottom of the washer.
R
Randall KnightAug 27, 2025
Why does my LG LGWADREM7150 show IE Inlet Error?
- M
  Mallory MyersAug 28, 2025
  The IE Inlet Error on your LG Washer can occur for several reasons. First, ensure that the water supply faucets are fully open. Check for any kinks, pinches, or crushing in the water inlet hoses behind or under the washer. The water inlet filters might be clogged, so cleaning them is advisable. Low water supply pressure to the faucet or house could also be the cause; check other faucets and flush the hoses. Finally, the use of leak-limiting hoses is not recommended as they can falsely trip and prevent the washer from filling.
P
Paul MartinAug 30, 2025
How to fix UE Unbalance Error on LG LGWADREM7150?
- K
  kortizAug 30, 2025
  The UE UNBALANCE ERROR on your LG Washer typically means the load is unbalanced. This can happen if the load is too small, in which case you should add additional items. It can also occur if heavy articles are mixed with lighter items; try to wash items of similar weight together. If the load is severely out of balance, manually redistribute the items, especially if they are tangled.
Y
yobrienSep 2, 2025
Why does my LG Washer show an IE Inlet Error?
- H
  hriversSep 2, 2025
  The IE Inlet Error on your LG Washer can occur for several reasons. First, ensure that your water supply faucets are fully open. Check that the water inlet hoses are not kinked, pinched, or crushed. Insufficient household water pressure or the use of leak-limiting hoses can also cause this error. Also, make sure that the end of the drain hose is higher than 29.5 inches (75 cm) above the bottom of the washer. If the issue persists, the water inlet filters may be clogged and need cleaning.
M
Michaela McdowellSep 5, 2025
How to fix the UE UNBALANCE ERROR on my LG Washer?
- T
  Timothy ThomasSep 5, 2025
  The UE UNBALANCE ERROR on your LG Washer typically means the load is unbalanced. This can happen if the load is too small; in this case, add additional items. It can also occur when heavy articles are mixed with lighter items; try to wash articles of similar weight. If articles have become tangled, manually redistribute the load to allow the washer to rebalance properly.
M
Michael HarrisonSep 8, 2025
How to fix OE WATER OUTLET ERROR on LG LGWADREM7150?
- J
  Jessica SmithSep 8, 2025
  The OE WATER OUTLET ERROR on your LG Washer typically means there's an issue with draining water. Check the drain hose to ensure it is free of clogs, kinks, or pinches, particularly behind or under the washer. Also, make sure the end of the drain hose is not more than 96 inches (2.4 m) above the bottom of the washer.
B
Bethany SextonSep 12, 2025
What to do if my LG LGWADREM7150 Washer displays the OE WATER OUTLET ERROR?
- B
  Brett MartinezSep 12, 2025
  The OE WATER OUTLET ERROR on your LG Washer indicates a drainage issue. This can be due to a kinked, pinched, or clogged drain hose; ensure the hose is free of obstructions. Also, verify that the end of the drain hose is not more than 96 inches (2.4 m) above the bottom of the washer; if it is, reposition the hose.