To Next PageTo Next PageWhy does my LG LHS-36SES Receiver remote control not work?
If the remote control for your LG Receiver isn't working, try these steps: 1. Point the remote at the receiver's remote sensor. 2. Ensure you're within 23 ft (7 m) of the receiver. 3. Remove any obstacles between the remote and the receiver. 4. Replace the remote's batteries with new ones.
Why is there no sound from my LG LHS-36SES, or is the sound very low?
If you're experiencing sound issues with your LG Receiver, consider these potential causes: 1. The equipment connected with the audio cable is not set to receive DVD audio signal output: Select the correct input mode of the receiver. 2. The audio cables are not connected securely: Connect the audio cable into the jacks securely. 3. The power of the equipment connected with the audio cable is turned off: Turn on the equipment connected with the audio cable. 4. The audio connecting cable is damaged: Replace it with new one.
Why does the LG Receiver remote control not work properly?
The LG Receiver remote control might not be working for several reasons: * Ensure the remote is pointed directly at the remote sensor on the DVD/CD Receiver. * Make sure you are within 23 ft (7 m) of the DVD/CD Receiver. * Check for any obstacles between the remote and the receiver and remove them. * The batteries in the remote control might be dead; replace them with new ones.
How to fix LG LHS-36SES Receiver when there is no sound?
If you are experiencing a lack of sound or very low sound levels with your LG Receiver, consider the following: * Ensure that the equipment connected with the audio cable is set to receive DVD audio signal output. * Check that the audio cables are securely connected. * Verify that the equipment connected to the audio cable is powered on. * The audio connecting cable may be damaged. If so, replace it.
What to do if my LG DVD VCR Combo has no power?
If your LG DVD VCR Combo has no power, the power cord might be disconnected. Ensure the power cord is securely plugged into the wall outlet.
Why does my LG DVD VCR Combo have no picture?
If your LG DVD VCR Combo shows no picture, several factors could be at play: * The TV might not be set to receive the DVD/VCR Combo receiver signal output. Select the appropriate video input mode on your TV. * The TV/VCR mode might be set to TV. Press the TV/VCR button on the remote to choose VCR mode. * The video cable might not be securely connected. Ensure it's properly connected. * The connected TV might be turned off. Turn on the TV.
What to do if my LG DVD VCR Combo does not start playback?
If your LG DVD VCR Combo doesn't start playback, consider these possibilities: * No tape is inserted. Insert a disc or tape, and check if the disc or tape indicator in the display window is lit. * An unplayable disc is inserted. Insert a playable disc, verifying the disc type, color system, and Regional code. * The disc is placed upside down. Place the disc with the playback side down. * The disc is not placed within the guide. Place the disc on the disc tray correctly inside the guide. * The disc is dirty. Clean the disc. * The Rating level is set. Cancel the Rating function or change the rating level.
What to do if LG Receiver has no power?
If your LG Receiver isn't powering on, the power cord might be disconnected. Ensure the power cord is securely plugged into the wall outlet.
What to do if there is no picture on my LG Receiver?
If you're not getting a picture from your LG Receiver, check the following: 1. Make sure your TV is set to the correct video input mode for the DVD signal. 2. Ensure the video cable is securely connected to both the receiver and the TV. 3. Verify that the connected TV is turned on.
How to fix loud hum or noise heard from LG LHS-36SES?
If you're hearing a loud hum or noise from your LG Receiver, check these: 1. The disc is dirty: Clean the disc. 2. The speakers and components are connected poorly: Connect the speakers and components securely. 3. The DVD/CD Receiver is located too close to the TV: Move your TV away from the audio components.
Covers electrical safety warnings, power cord precautions, and product disposal information.
Explains manual symbols, disc handling, types, and output settings.
Details the controls, buttons, and display indicators on the front panel.
Provides a comprehensive guide to the functions of all remote control buttons.
Guides on connecting power, antenna, AV, RF, and speakers to the rear panel.
Explains audio formats like DTS, Dolby Digital, Pro Logic, and various sound modes.
Covers AV, RF, and S-Video connections to TV and accessories.
Details progressive scan video setup and radio aerial connections.
Guides on connecting speakers and positioning them for optimal sound.
Instructions for tuning TV channels for VCR output and initial system preset.
Details manual clock setting, color system configuration, and auto tuning.
Explains how to manually tune, change station order, and delete TV stations.
Explains how to use and interpret on-screen displays during DVD playback.
Covers language, disc menu, display, and audio output settings.
Guides on setting parental controls, ratings, passwords, and country codes.
Covers basic playback controls, picture search, slow motion, and CM Skip.
Explains Instant Timer Recording (ITR) and recording from external sources.
Guides on ShowView programming, VPS, and timer recording setup.
Covers disc loading, playback, navigation, search, and audio selection.
Explains still picture, slow motion, repeat, random, 3D surround, and time search.
Guides on accessing DVD menus, titles, angles, and language selection.
Covers playing Audio CDs, MP3/WMA files, and disc compatibility.
Explains how to create, manage, and erase tracks from a program list.
Guides on navigating JPEG files, slideshows, rotation, and music playback.
Details speaker configuration, volume, distance adjustments, and testing.
Explains DVD VR format, CPRM copy protection, and unit maintenance.
Guides on playing DivX files, navigation, and compatibility details.
Explains on-screen display, tape counter, and video doctor self-diagnosis.
Covers Hi-Fi stereo modes, wide screen compatibility, and decoder setup.
Explains last scene memory, screen saver, and video mode settings.
Step-by-step guides for copying DVDs to VHS and recording from external sources.
Covers preset stations, manual/auto tuning, RDS, and mute function.
Provides lists of language and country codes for initial settings and disc compatibility.
Addresses problems with power, picture, sound, playback, and tape operation.
Troubleshoots remote control, tape playback, recording, audio, and condensation issues.
Lists technical specifications for general, DVD, VCR, tuner, amplifier, and speaker sections.
General