Need help?Do you have a question about the LG LMH2235ST and is the answer not in the manual?
General| Style | over-the-range |
|---|---|
| Color | stainless steel |
| Total Capacity | 2.2 cubic feet |
| Power Levels | 10 |
| Venting Type | convertible |
| Sensor Cooking | yes |
| Child Lock | yes |
| Timer | yes |
| Microwave Power | 1000 watts |
| Voltage | 120 volts |
Weight and Dimensions| Depth | 15 13/16 inches |
|---|---|
| Height | 17 15/16 inches |
| Width | 29 7/8 inches |
| Net Weight | 73.5 pounds |
Guidelines to prevent excessive microwave energy exposure during servicing.
Technical details including power, dimensions, and components.
Table detailing switch modes and states for interlock and monitor switches.
Warnings about handling high-voltage components and general repair safety.
Precautions regarding microwave radiation exposure during servicing.
Instructions for safely installing the microwave oven unit.
Importance and procedure for grounding the appliance for electrical safety.
Identifies and illustrates the various buttons and indicators on the microwave's control panel.
Detailed description of each button and its function on the control panel.
Schematic representation of the internal electrical connections and components of the microwave.
A table mapping input keys to their corresponding functions and internal codes.
General precautions and trial operation procedures before performing troubleshooting.
Critical safety warnings and precautions for service technicians, especially regarding high voltage.
Procedures for accessing self-diagnosis modes and interpreting error codes.
A summary of basic checks, often presented as flowcharts or diagrams for diagnosing issues.
Diagnostic flowcharts for specific symptoms like 'No Display or Dead'.
Lists required equipment and details the steps for measuring microwave energy leakage.
Guidelines for measuring leakage and recording results.
Steps and formula for measuring the microwave power output using a water load.
Details the door interlock mechanism and procedures for adjusting latches and switches.
Testing the correct operational sequence of the interlock switches.
Reiteration of leakage testing requirements after interlock system servicing.
Procedures for testing the continuity of interlock switches.
Resistance testing procedures and normal values for the transformer and magnetron.
Procedures for testing capacitor, diode, and relay continuity and resistance.
Resistance testing for the turntable motor and noise filter.
Resistance testing for the touch key board and its connector.
Step-by-step guide for removing the main power and control circuit board assembly.
Instructions for safely removing the outer casing of the microwave oven.
Detailed steps for removing the door interlock switches from the latch board.
Procedures for carefully removing the magnetron assembly, including safety notes.
Instructions for removing the stirrer fan and its cover.
Steps for removing the entire door and disassembling the door screen and choke.
Guidelines for correctly mounting and adjusting the door assembly.
Steps for removing the ventilation fan motor and bracket.
Procedures for removing the turntable motor and its base plate.
Overview of the exploded view section, listing model and product codes.
To Next Page
