18
INSTALLATION IN CASEMENT STYLE WINDOWS
NOTE: The window installation kit can be used with casement windows between 18
ʺ
and 48
ʺ
tall.
Foam seal A
(Adhesive type)
Foam seal C
(Adhesive
type-shorter)
Joints en
Mousse A
(Type adhésif)
Joints en
Mousse C
(plus court de
type adhésif)
Sellado con
espuma A
(tipo adhesivo)
Sellado con
espuma C
(tipo adhesivo-
más corto)
1
Cut the foam seal A(adhesive type) &
C(adhesive type-shorter) to the proper
length, and attach it to the window sash and
frame.
2
Insert the vent panel assembly, including
extension panels, if needed, into the window
opening. Extend the extension panels, if
used.
Foam seal B
(Non-adhesive type)
Sellado con espuma B
(tipo adhesivo)
Joints en Mousse B
(Non adhésif)
4
Cut the foam seal B(Non-adhesive type) to
the window height. Stuff the foam seal B
between the glass and the window to
prevent air and insects from getting into the
room.
3
I N S TA L L AT I O N I N S T RU C T I O N S
Extension panel
(if required)
Vent
Panel
Type B screws
Carefully close the window. Secure the vent
panel in place with 4 type B screws, plus
one screw for each extension:
Vent panel only: 4 type B screws
Vent panel and
one extension: 5 type B screws
Vent panel and
two extensions: 6 type B screws
Two vent panels and
two extensions: 9 type B screws
To Next Page
Loading...
