11INSTALLATION
ENGLISH
• To reduce the risk of electric shock, do not install
the refrigerator in a wet or damp area.
Flooring
To avoid noise and vibration, the unit must be
installed and leveled on a solidly constructed floor.
If required, adjust the leveling legs to compensate
for the unevenness of the floor.
• Installing on carpeting, soft tile surfaces, a
platform or weakly supported structure is not
recommended.
Ambient Temperature
Install this appliance in an area where the
temperature is between 55 °F (13 °C) and 110 °F
(43 °C).
If the temperature around the appliance is too low
or high, cooling ability may be adversely affected.
Installing the Rear Spacers
This feature is only available on some models.
Install the spacers on the upper corners at the
back of the appliance. The spacers are included
with the accessory kit inside the appliance.
• The spacers help improve the energy efficiency
of the appliance by providing clearance between
the back of the appliance and the wall. This
allows for improved air circulation.
To Next Page
Loading...
Need help?
General
