ENGLISH ESPAÑOLFRANÇAIS
7
OPERATION
Starting
When your refrigerator is first installed, allow to
run 2-3 hours to stabilize at normal operating
temperature prior to filling it with fresh or frozen
foods.
If operation is interrupted, wait 5 minutes before
restarting.
Temperature Control
Your refrigerator has two controls that let you
regulate the temperature in the refrigerator and
freezer compartments.
❒ REFRIGERATOR
■ Initially set the TEMP. CONTROL at 4. Then
adjust the compartment temperature
according to your desire.
■ If you want an inside temperature slightly
less cold or colder, turn the knob towards
MIN or MAX, respectively.
When the surrounding temperature is low,
adjust the TEMP. CONTROL MIN.
❒ FREEZER
■ Freezer temperature control is on the top of
the Refrigerator-Freezer. Initially set the
Freeze Temp at mid-point. By pressing the
Freezer Temp button, you can adjust the
temperature of the Freezer as indicated by
the numbers of lamps lit.(The setting is
composed of five steps; 5 lamps lit indicates
coldest.)
■ When you starting the Refrigerator-Freezer
or connecting the power plug to the outlet,
temperature setting is automatically set to the
mid-point.
■ When the button is pushed, the buzzer
sounds.
Quick Freeze
■ This function is used when you want to
freeze the foods quickly. Press the QUICK
FREEZE button once, and then the quick
freeze operation starts with the lamp lit.
The quick freeze operation takes about 3
hours.
When its operation ends, it automatically
returns to the normal state.
If you want to stop the quick freeze
operation, press the QUICK FREEZE button
once more, the lamp goes out, and the quick
freeze operation stops and the refrigerator
returns to the normal state.
To Next Page
Loading...
Need help?
General
