36 OPERATION
Glide‘N’Serve
Using the Glide‘N’Serve
This function provides storage space with a
variable temperature control that can keep the
compartment at a slightly different temperature
than the refrigerator section. This drawer can be
used for large party trays, deli items and
beverages. (This drawer should not be used to
store vegetables that require high humidity.)
Press the Select button to choose between
Produce (Cold), Deli (Colder) and Meat (Coldest).
CAUTION
• Do place any items on the Glide'N'Serve cover.
Detaching/Assembling the
Glide‘N’Serve
To remove the Glide'N'Serve, pull out the
Glide'N'Serve to full extension, lift the front
up, and pull straight out.
To assemble, slightly tilt up the front, insert
the Glide'N'Serve into the frame and push it
back into place.
Refrigerator Shelves
The shelves in the refrigerator are adjustable to
meet individual storage needs. Your model may
have full or split shelves.
Adjusting the shelves to fit items of different
heights will make finding the exact item you want
easier.
Using the Folding Shelf
Store taller items, such as a gallon container or
bottles, by pushing the front half of the shelf
underneath the back half of the shelf. Pull the
front of the shelf forward to return to a full shelf.
CAUTION
• Glass shelves are heavy. Use special care when
removing them.
• Do not clean glass shelves with warm water
while they are cold. Shelves may break if
exposed to sudden temperature changes or
impact.
Detaching the Shelf
Tilt up the front of the shelf and lift the shelf
straight up.
Pull the shelf out.
To Next Page
Loading...
