20 INSTALLATION
Assembling the Right Refrigerator
Door
CAUTION
• Install the right-side door first.
Make sure that the plastic sleeve is inserted
in the bottom of the door. Lower the door
onto the middle hinge pin as shown in the
figure.
Fit the hinge a over the hinge lever latch b
and slot it into place. Rotate the lever
c
counterclockwise to secure the hinge.
Connect all the wire harnesses d.
NOTE
• The number of wire harnesses may vary
depending on the model.
Assembling the Left Refrigerator
Door
CAUTION
• Install the left refrigerator door after the right
door is installed.
Make sure that the plastic sleeve is inserted
in the bottom of the door. Install the
refrigerator door onto the middle hinge.
Fit the hinge a over the hinge lever latch b
and slot it into place. Rotate the lever
c
clockwise and fasten the hinge.
Connect all the wire harnesses and the
ground screw.
To Next Page
Loading...
