1-7. Option designation circuit (model separation function)
(1) GR-L267BV(T)RA
(2) GR-L267BV(T,S)PA
The circuits shown above vary according to which features are included on your particular model.
uThese circuits are preset at the factory and cannot be altered.
NOTE: The chart makes absolutely no sense. You have Optichill no matter which way the connection is set.
EXPLANATION FOR MICOM CIRCUIT
- 42 -
Separation Connection Status Application Standard
Connection OptiChill exist
OP1
OUT OptiChill don’t exist
To Next Page
Loading...
