Filter
replacement
It is recommended that you replace the filter
when the water filter indicator light turns on or
your water dispenser or ice maker decreases
noticeably.
After changing the water filter cartridge, reset the
water filter status display and indicator light by
pressing and holding the BUTTON for 3 seconds.
1)Removethe old cartridge.
Rotatethe knob of the cartridgecounterclockwise.
Whenthecartridgeisremoved,youwill feel it click
outof place.
Pulloutthecartridge.
Replacewith a new cartridge.
Takethe new cartridgeout of its packagingandremove
protectivecoverfrom the o-rings.With cartridgeknobin
the verticalposition,pushthe new filter cartridgeinto
the coveruntilitstops.
Ifyoucan'tturnthe filterfrom sideto side,it isn'tfully
inserted.Pushit infirmlyandtwist itintoplace.Youwill
hearthesnapwhen it clicksinto place.Usingitshandle,
twist thecartridgeclockwiseabout1/4turn.Youwillhear
thesnapwhenitclicksintoplace.
3) FlushingtheWater SystemAfter ReplacingFilter.
Dispensewater throughthe water dispenserfor 3
minutesto purgethe system.
To Next Page
Loading...
