Connecting
the refrigerator
to a water source
Warning
Tools required
Cold water supply
Water connection instruction guide
Readall directions carefully before you begin.
Connect to potable water supply only.
• Standard screwdriver
• 7/16-inchand 1/2-inchopen-end wrenches or two adjustable wrenches
• 1/4-inchnut driver
• 1/4-inchdrill bit
• Hand drill or electric drill (properly grounded)
The icemaker water valve contains a flow washer which is used as a water
pressure regulator.
The icemaker needs to be connected to a cold water line with water pressure
20 - 120 psi (Ib/inch2)
To Next Page
Loading...
