1-8. Switch entry circuit
The following circuits are sensing signal form the damper motor reed switch for testing and diagnosing the refrigerator.
(1) GR-G277STSA(LSC27990TT)
1-9. Option designation circuit (model separation function)
(1) GR-G277STSA(LSC27990TT)
The circuits shown above vary according to which features are included on your particular model.
uThese circuits are preset at the factory and cannot be altered.
EXPLANATION FOR MICOM CIRCUIT
- 28 -
Separation Connection Status Application Standard
Connection OptiFresh exist
OP1
OUT OptiFresh don’t exist
To Next Page
Loading...
