TROUBLE DIAGNOSIS
-72-
Problems Symptom Causes Checks Measures Remarks
Bad cooling. Freezer  Compressor does Compressor Lead Wire Check compressor Lead Wire   Reconnect Lead 
temperature is not start. is cut. with a tester. Wire.
high. Defective compressor Measure voltage at PCB CON2 Replace relay RY1 Refer to load
driving relay. (3 & 9) after pressing main PCB and RY2 or PCB. driving circuit in 
test switch once. It is OK if  circuit 
voltage is normal. explanation.
Defective freezer  Defective Freezer  Check resistance of freezer  Replace freezer  Refer to 
sensor. sensor parts. sensor with a tester. sensor. resistance
characteristics
table of sensor in
circuit. Refer to 
tables on pages
39~42
The wrong sensor Confirm the color of sensor in  Repair main PCB explanation.
has been installed. circuits (main PCB sensor  sensor housing
Order by model number housing).
and part number.
Defective freezer fan Fan motor lead wire  Check fan motor lead wire  Reconnect lead 
motor. is cut. with a tester. wire.
• Defective door switch Measure the voltage between  • Replace door  Refer to load 
(freezer, refrigerator, PCB power blue line and fan switch 
(freezer, 
driving circuits in
home bar). motor after pressing test switch
refrigerator, 
and circuit 
• Defective fan motor. of Main PCB. If the voltage is  home bar). explanation.
• Defective fan motor normal, it is OK. • Replace fan motor.
driving relay. • Replace relay RY5 
& RY6 or PCB.
Faulty defrost. Refer to faulty defrost items in trouble diagnosis  Refer to trouble 
functions. diagnosis 
function.