22 OPERATION
Canceling Special Functions
1
Press FUNC button repeatedly to select the
desired function.
2
Press SET/CANCEL button to cancel the
function.
Using the Air Purification Function
These functions supply clean and fresh air by ion
particles and the filter.
Function Display Description
Ionizer
Ion particles from
Ionizer sterilize
the aerial bacteria
and other harmful
substances.
Plasma
It removes
microscopic
contaminants
from the intake air
completely to supply
clean and fresh air.
NOTE
• You can use this function without turning the air
conditioner on.
• Both the plasma lamp and the cooling lamp light up
while Smoke Away/Plasma is in operation on some
models.
• Do not touch ionizer during operation.
• This function may operate differently from the
remote control display.
Using the Silent Function
This function prevents potential claims by neighbors,
reducing noise from outdoor units.
•
is displayed on the display screen.
NOTE
• This function is disabled when you press MODE or
ENERGY CTRL or JET MODE button.
• This function is available with Cooling, Heating,
Auto Changeover, Auto Operation Mode.
Using the Ion Care Function
This function keeps your skin moisturized by
generating ion clusters which is absorbed into the
surface of skin.
•
is displayed on the display screen about 3
seconds.
NOTE
• This function is available with Cooling, Fan Mode
and Air Purification function.
Using the Jet Dry Function
This function maximizes the performance of
dehumidification.
•
, are displayed on the display screen.
NOTE
• This function is available with Cooling,
Dehumidification, Auto Operation, Fan Mode and
Air Purification function.
• This function is not available with Sleep function.
• This function is disabled when you press MODE
button.
To Next Page
Loading...
Need help?
General
