Owner's Manual 15
ENGLISH
Maintenance and Service
3. Take the Total heat exchanger out.
Catch the handle and then take the Total heat
exchanger out from the main body. (2 units)
Models: 1 500 / 2 000 CMH
1. Remove the maintenance cover.
Put the hands inside of the ceiling from the maintenance cover, and pull the maintenance cover up.
(Looser the hinge and detach the maintenance cover.)
2. Take the air filter out.
Take the air filter with each contained to the
left/right downside of the Total heat exchanger.
h If it adheres to the ceiling in reverse, it is
equal to the left/right topside of the Total
heat exchanger.
3. Take the Total heat exchanger out.
Catch the handle and then take the Total heat
exchanger out from the main body. (4 units)
Maintenance Cover
Main body
Main body
To Next Page
Loading...
