LG M1994A-PT - Page 20

Copyright LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
- 20 -
4. No Raster Component Signal
Fail
Fail
Fail
Check input source cable
and jack.
Check the JK105
Re-soldering or Change the
defect part.
Re-soldering or Change the
defect part, Check the X300
Pass
Check the input/output
of R288
Check the input/output
of R319
Check the input/output
of IC301.
Pass
Pass
Repeat [A,B] process.
Pass
X300