It is used to enlarge the screen and also used with
several products to view screen,
Tile mode and choose Tile alignment and set the ID of the current product to set location.
Adjust the horizontal size of the screen taking into account the size of the bezel.
Adjust the vertical size of the screen taking into account the size of the bezel.
Adjust the horizontal position of the screen taking into account the size of the bezel.
Adjust the vertical position of the screen taking into account the size of the bezel.
Function to initialize and release Tile. All Tile setting are released when selecting.
Tile recall and the screen returns to Full screen.
Select the location of the Tile by setting an ID.
• To use this function
- You can connect the product with several other products and use the Tile mode function.
• Tile mode
• H Size
• V Size
• H-Position
• V-Position
• Reset
• ID
To Next Page
Loading...
