6
Setting the
Clock
You can set either12 hour clock or 24 hour clock.
In the following example I will show you how to set the time for 14:35 when using the 24 hour clock.
Make sure that you have removed all packaging from your oven.
When your oven is plugged in for the
first time or when power resumes after a
power cut, a ‘0’ will be shown in the
display; you will have to reset the clock.
If the clock (or display) shows any
strange looking symbols, unplug your
oven from the electrical socket and plug
it back in and reset the clock.
Make sure that you have correctly installed your oven as described
earlier in this book.
Press STOP/CLEAR.
Press Clock once.
Press
DIAL
for 24 hour clock conformation.
(If you want to use a 12 hour clock, Press Clock once more. If you want to
change different option after setting clock, you have to unplug and plug it
back in.)
Turn DIAL until display shows “14:00”.
Press DIAL for hour
confirmation.
Turn DIAL until display shows “14:35”.
Press DIAL.
The clock starts counting.
To Next Page
Loading...
Need help?
General
