Setting the
Clock
You can set either12 hour clock or 24 hour clock.
In the following example I will show you how to set the time for 14:35 when using the 24 clock.
Make sure that you have removed all packaging from your oven.
Make sure that you have correctly installed your oven asdescribed earlier
in this book.
Plug in your oven for the first time.
"24H" appears on the display.
(If you want to use different option,Press
Clock & Auto Defrost.
.
If you want to change different option after setting clock,
you have to unplug and plug it back in.)
Turn DIAL until display shows “14: ”.
Press
START
for hour confirmation.
Turn DIAL until display shows “14:35”.
Press
START
.
The clock starts counting.
When your oven isplugged in for the
first time or when power resumes after a
power cut, a ‘24H’ will be shown in the
display; you can reset the clock.
If the clock (or display) shows any
strange looking symbols, unplug your
oven from the electrical socket and plug
it back in and reset the clock.
Downloaded From Microwave-Manual.com Manuals
To Next Page
Loading...
Need help?
General
