63
Settings
Wi-Fi Calling – Wi-Fi Calling can improve your coverage and allows you to
make phone calls over a Wi-Fi network (when a Wi-Fi network is available).
Important!
Wi-Fi Calling requires that you use the SIM card that is shipped with your phone.
Also, you must register your address for 9-1-1. Wi-Fi Calling will not work until you
have registered for 9-1-1 by logging into your account at www.metropcs.com. Go to
your profile and click Customer Info and continue on to enter your address.
- To use Wi-Fi Calling, you must first turn on Wi-Fi, connect to a Wi-Fi
network, and then turn on Wi-Fi Calling.
- When the Wi-Fi Calling feature is on, your phone displays the Wi-Fi
Calling icon on the Status Bar.
- To stay on a Wi-Fi call, you must remain within range of the Wi-Fi network.
Your call will drop as you leave the Wi-Fi range. When your Wi-Fi signal
weakens, your phone will beep and display a warning message alerting
you that your call will drop if the signal gets weaker.
Wi-Fi Calling offers three connection options:
- Wi-Fi preferred: All calls are made over an available Wi-Fi network. If
there are no available Wi-Fi networks calls are made over the cellular
network.
- Cellular network preferred: All calls are made over the cellular network
unless the cellular network is not available, then calls are made over an
available Wi-Fi network.
- Never use cellular network: All calls are made over an available Wi-
Fi network. If there are no available Wi-Fi networks, your calls will not
connect.
Incoming voice call pop-up – Display incoming voice call popup when an
app is in use.
Call reject – Allows you to set the call reject function. Choose from Call
reject mode or Reject calls from.
Decline with message – When you want to reject a call, you can send a
quick message using this function. This is useful if you need to reject a call
during a meeting.
To Next Page
Loading...
