13
To set current time
SETTINGS TIME Clock
Checks or changes the time while watching TV.
• Auto : Synchronizes the TV clock to the digital time information
sent by the TV station.
• Manual : Sets the time and date manually if the auto setup does
not correspond to the current time.
To set the TV to turn on and o automatically
SETTINGS TIME Off Time / On Time
You can set the Power On/O time for the TV.
Select Off if you are not going to set Off Time / On Time.
• To use Off Time / On Time, set the current time correctly.
• Even when the On Time function is on, the TV will turn o
automatically in 120 minutes when no button is pressed within
that time.
To use Sleep Timer
SETTINGS TIME Sleep Timer
Turns o the TV after a preset number of minutes.
To cancel the Sleep Timer, select Off.
To set Automatic Standby
SETTINGS TIME Automatic Standby
[This function is available on certain models or in certain countries only]
If you do not press any button on the TV or remote control for a certain
period, the TV will automatically switch to standby mode.
• This function does not work on Store mode or while software
update.
To set password
SETTINGS LOCK Set Password
Sets or changes the TV password.
• The initial password is set to ‘0000’.
• When France is selected for Country, password is not ‘0000’ but
‘1234’.
• When France is selected for Country, password cannot be set to
‘0000’.
To lock system
SETTINGS LOCK Lock System
Permits only specic programmes by blocking programmes or external
input.
First set Lock System to On.
• Parental Guidance (Only DTV) : This function operates according
to information from the broadcaster. Therefore if the signal has
incorrect information, this function does not operate. Prevents
children from watching certain adult TV programmes according
to the ratings limit set. Enter a password to watch a blocked
programme. Ratings dier by country.
• Input Block : Blocks the input sources.
To Next Page
Loading...
Need help?
General
