If the Network Is Not Automatically Connected
Some models may not be supported.
Setting a Wireless Network
Connect the LAN port of the TV and the router using a LAN cable.
The router should be connected to the Internet beforehand.
If the router supports DHCP, the TV is automatically connected to the network when
you connect the TV to the network with a LAN cable.
01
Press the button on the remote control.02
Select General Network Wired Connection (Ethernet).
To see the details, click the Settings Network Wired Connection (Ethernet)
in User Guide.
03
Turn on the power of the router connected to the Internet.01
To Next Page
Loading...
Need help?
General
