What to do if my LG LED TV picture is broken or freezing?
If your LG LED TV picture is broken or freezing, you can try the following: * Check the RF signal level. * Upgrade the software (S/W Upgrade). * Replace the Main Board. * Contact your signal distributor or broadcaster (Cable or Air).
Why is there no video but normal audio on my LG LED TV?
If you are experiencing no video but normal audio on your LG LED TV, the following steps may help: * Check the Power Board 12V output. * Replace the T-con/Main Board or module. * Repair the Power Board or its parts.
What to do if my LG LED TV has a color error?
If your LG LED TV has a color error, there are a few things you can try: * Check and replace the Link Cable. * Replace the Main Board. * Request repair for the external device or cable connected to the TV.
What to do if my LG LED TV has vertical or horizontal bars, residual image, light spot, or external device color error?
If your LG LED TV displays vertical or horizontal bars, a residual image, a light spot, or an external device color error, consider these steps: * Check and replace the Link Cable. * Replace the Main/T-con Board. * Request repair for the external device. * Upgrade the software. * Check the screen condition by input. * Connect another external input device and cable.
General| Screen Size | 55 inches |
|---|---|
| Display Type | OLED |
| Refresh Rate | 120 Hz |
| Audio Output | 40W (2.2 Channel) |
| Smart TV | Yes |
| Operating System | webOS |
| HDMI Ports | 4 |
| USB Ports | 3 |
| Processor | α9 Gen3 AI Processor 4K |
| Bluetooth | Yes |
| Wi-Fi | Yes |
| Ethernet | Yes |
| Resolution | 3840 x 2160 (4K UHD) |
| HDR Support | HDR10, Dolby Vision |
| Dimensions (W x H x D) | 122.8 x 71.9 x 4.6 cm (without stand) |
| Weight | 18.9 kg (without stand) |
To Next Page
