To Next Page

To Previous Page

Recommendations for Minimising Image Retention

When watching the TV for a long time, press the button on the remote control, go to → [Picture] → [Select Mode] and set the mode

to [APS], go to [Advanced Settings] → [Brightness] and set [OLED Pixel Brightness] to a lower level. In addition, press the button on the

remote control, go to → [Support] → [OLED Screen Saver] and set the [Adjust Logo Brightness] value to [High].

When showing images with black bars at the top/bottom/left/right side of the screen, press the

button on the remote control, press ,

and go to [Picture] → [Aspect Ratio] → [User Selection] → [Vertical Zoom] or [4-Way Zoom] to remove the black bars.

Turn off the menus for setting up devices such as set-top boxes so that they are not displayed on the screen for a long time.

Note

• When the screen is showing one fixed image for a long time, the screen brightness will be automatically reduced

and then restored once the screen content changes. This is a normal function to minimise image retention.

Other manuals for LG OLED65C1PUB

Questions and Answers:

Need help?

Do you have a question about the LG OLED65C1PUB and is the answer not in the manual?

General

Screen shape	Flat
Display diagonal	65 \
Display brightness	- cd/m²
Display technology	OLED
Native aspect ratio	16:9
Native refresh rate	120 Hz
Contrast ratio (typical)	-
Display diagonal (metric)	165.1 cm
Motion interpolation technology	OLED Motion Pro
Tuner type	Analog & digital
Digital signal format system	ATSC
Smart modes	Cinema, Energy saving, Game, Sports, Standard, Vivid
App distribution platform	LG Apps
Operating system installed	Web OS
Sound modes	Dolby Audio
RMS rated power	40 W
Wi-Fi standards	Wi-Fi 5 (802.11ac)
Bluetooth version	5.0
Stand type	Connected stand
Product color	Gray
Panel mounting interface	300 x 200 mm
Game features	Auto Low Latency Mode (ALLM), Variable Refresh Rate (VRR)
Subtitle formats supported	ASS, PSB, SMI, SRT, SSA, SUB, TXT
High Dynamic Range (HDR) technology	High Dynamic Range 10 (HDR10)
HDMI version	2.2
PC in (D-Sub)	No
HDMI ports quantity	4
USB 2.0 ports quantity	3
Ethernet LAN (RJ-45) ports	1
Consumer Electronics Control (CEC)	SimpLink
AC input voltage	120 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	130 W
Cables included	AC
Package depth	205.74 mm
Package width	1676.4 mm
Package height	949.96 mm
Package weight	41186.19 g
Quantity per box	1 pc(s)

Weight and Dimensions