What to do if my LG OLED TV turns off suddenly?
If your LG OLED TV turns off unexpectedly, there are a few potential reasons. First, the power supply may be interrupted, so check the power control settings. Also, the Sleep Timer or Timer Power Off feature might be activated in the Timers settings. Finally, if the TV doesn't receive a signal for 15 minutes, it will automatically turn off.
Why does my LG OLED65E6P turn off suddenly?
If your LG OLED TV suddenly turns off, first examine the power control settings to ensure the power supply isn't being interrupted. Also, verify if the Sleep Timer or Timer Power Off feature is enabled within the Timers settings. Lastly, be aware that the TV will automatically shut down after 15 minutes of inactivity if no signal is detected.
What to do if my LG OLED TV remote is not working?
If you're having trouble controlling your LG OLED TV with the remote, try these steps: First, make sure nothing is blocking the remote's signal by checking for obstructions over the receiver on the TV or between the remote and the TV. Then, replace the remote batteries with a fresh set.
How to fix LG OLED65E6P remote control not working?
If you're having trouble controlling your LG OLED TV with the remote, first check if anything, like tape, is covering the receiver. Also, make sure there are no obstructions between the remote and the TV. If those aren't the problem, try replacing the remote's batteries with new ones.
General| Screen Size | 65 inches |
|---|---|
| Display Type | OLED |
| Smart TV | Yes (webOS) |
| Audio Output | 40W |
| Wi-Fi | Yes |
| HDMI Ports | 4 |
| USB Ports | 3 |
| 3D | Yes |
| Refresh Rate | 120Hz |
| Curved Screen | No |
| Resolution | 3840 x 2160 (4K) |
| HDR Support | Yes |
Essential guidelines for safe operation, including avoiding water, proper cleaning, and ventilation.
Instructions to prevent electric shock and fire, covering power cord, grounding, and moisture.
Advice on grounding, moving, ventilation, and environmental considerations for safe use.
A comprehensive list of commands for controlling TV functions externally.
Details on transmission, receiving protocols, and data mapping for external control.
To Next Page
