(2-1) Unscrew the 5 Screws of Stand.
(2-2) Tilt the stand bridge with both hands and pull the Stand’s latch from the hole of the Cover, Rear.(3EA)
2-1
※ Unscrew 5ea screws
11-2
11-2
11-2
11-2
11-2
※ Must need at least 2 men.
◀ A man holding the head part
▼ A man inserting the Stand
Stand Bridge
※ Grip the both sides of the stand bridge
2-2
※ Be sure to hold the Head part while disassembling the Stand.
To Next Page
Loading...
