LG OLED65G36LA Owner's Manual

7
For installation on concrete wall
Wall mounting anchor
Wall mounting screw
1 Drill holes in anchor locations with a drill bit of Ø8 mm to a depth of
80mm to 100mm.
2 Clean the drilled holes.
3 Insert the enclosed anchors for fixing the wall mount into the holes. (Use
a hammer when inserting anchors.)
4 Push the wall mount support closely toward the wall to match the hole
locations.
5 Tighten screws for fixing the wall mount to the holes. At this time, tighten
the screws to a torque of between 45kgf/cm to 60kgf/cm.
For installation on wood stud
Drywall
Wood stud
76 mm
Use the Ø4mm drill bit for wood to drill holes with the depth of 76mm.
(Clean the drilled hole.)
Without using the wall mounting anchor, fasten the wall mounting screw
directly to the wood stud.
After Installation
• When connecting additional cables from the sides, we recommend
holding the centre of the TV horizontally or vertically and pulling the
product to make sure there is sufficient distance from the wall before
connecting.
• When connecting additional cables from the bottom, we recommend
releasing the TV from the wall mount before connecting.
(For example)
• Use cable management systems to arrange the cables at the bottom of
the TV as shown below. Cable managements are not provided with the
product, so purchase them separately.
• After installing the product, be sure to use it adhered to the wall.
- Using the product while it is not adhered to the wall may damage or
shake the product.
• Do not use a sharp object when you detached the cable cover. This could
damage the cable or the cabinet. It may also cause personal harm.
(Depending on model)
Antenna/Cable
Connect the TV to a wall antenna socket with an RF cable (75Ω).
• Use a signal splitter to use more than 2 TVs.
• If the image quality is poor, install a signal amplifier properly to improve
the image quality.
• If the image quality is poor with an antenna connected, try to realign the
antenna in the correct direction.
• An antenna cable and converter are not supplied.
• For a location that is not supported with Ultra HD broadcasting, this TV
cannot receive Ultra HD broadcasts directly.
Satellite dish
Connect the TV to a satellite dish to a satellite socket with a satellite RF cable
(75Ω). (Depending on model)

LG OLED65G36LA Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	65 \
Display brightness	- cd/m²
Display technology	OLED evo
Native aspect ratio	16:9
Native refresh rate	120 Hz
Display diagonal (metric)	164 cm
Motion interpolation technology	-
Game features	Auto Low Latency Mode (ALLM), Game Optimizer, Variable Refresh Rate (VRR)
AMD FreeSync type	FreeSync Premium
Audio formats supported	AAC, AC3, AC4, EAC3, HE-AAC, MP2, MP3, PCM, WMA
Smartphone remote support	Yes
Picture processing technology	LG AI Picture Pro
High Dynamic Range (HDR) technology	Dolby Vision, High Dynamic Range 10 (HDR10), Hybrid Log-Gamma (HLG)
PC in (D-Sub)	No
RF ports quantity	2
HDMI ports quantity	4
USB 2.0 ports quantity	3
Ethernet LAN (RJ-45) ports	1
Consumer Electronics Control (CEC)	SimpLink
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
Smart modes	Cinema, Filmmaker, Game, Sports, Standard, Vivid
Operating system version	23
Operating system installed	Web OS
Sound modes	AI Sound Pro, Clear Voice Pro
Audio decoders	Dolby Atmos
RMS rated power	60 W
Audio output channels	4.2 channels
Wi-Fi standards	Wi-Fi 6 (802.11ax)
Bluetooth version	5.0
Product color	Black
Panel mounting interface	300 x 300 mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Energy efficiency scale	A to G
Power consumption (standby)	0.5 W
Power consumption (typical)	- W
Repairability index	8.3

Weight and Dimensions

Depth (without stand)	24.3 mm
Width (without stand)	1441 mm
Height (without stand)	826 mm
Weight (without stand)	23900 g