(3-1) Insert the ‘Plastic scraper’ on the indicated side area of Rear Cover.
(3-2) If you push the ‘Plastic scraper’ , the holder from Rear Cover will be detach.
And then you can see the gap at the bottom of Rear Cover.
(3-3) ~ (3-4) Hold the on the right-bottom area and pull up the bottom of rear cover slowly.
(3-5) ~ (3-6) If you pulled up all bottom area of Rear Cover, hold the each side-bottom area by both hands and then push up it with a little shaking.
TOK!
3-1
3-2
3-3 3-4 3-5 3-6
GAP
Plastic scraper
Rear Cover
OLED65G6 Disassembly Guide
To Next Page
Loading...
