- 22 -
Copyright © LG Electronics Inc. All rights reserved.
Only for training and service purposes.
(3-1) Unscrew the Shaft(C) 4EA on the underside of a stand-top. (Use hexagonal wrench)
* The Shaft(C) is not completely separated from the Stand. (The Shaft(C) is xed to the Stand by washer.)
(4-1) Lift the Head part and separate it from the Stand.
3-1
C
C
C
C
C
The Shaft is fully released status.
(※ The Shaft is not separated from the Stand)
To Next Page
Loading...
