※ Follow the Manual. (1-1, 1-2, 2-1, 2-2, ... )
(1-1) Put the set on a flat floor and separate the DC Cable Cover.(Pull the left side of the cover to separate.)
(1-2) Separate the Main Cable Cover. (Pull the right side of the cover to separate.)
Pull the Stand Cable Cover to separate (vertical direction, horizontal direction 1EA each), and disconnect the varieties of cables.
(1-3) Unscrew Screw(A) 1EA for DC Cable Fixer, and disconnect the DC Cable.
OLED88ZX - Working Guide
1-1
A
DC Cable Fixer
1-3
DC Cable
1-2
Stand
Cable Cover
Stand
Cable Cover
To Next Page
Loading...
